qlb.

Footwear from future now.

Gadget - sneakers

The world's first sneakers-gadgets with heating, blowing and massage functions. Controlled via a mobile application via bluetooth.

A NEW ERA IN THE WORLD OF FOOTWEAR

Luna qlb.

Outside Air Cool Pro Duo - a specially designed system for taking in external air and blowing the foot inside the sneaker with the help of fans and a system of special channels for wiring and blowing air.
Protected from moisture and dust as much as possible.

Top Warm Element - Modern technological heated micro element for powerful and safe heating of the inner surface of sneakers.

Excentric Massage Motor Element -
Massage vibration motors are eccentrics arranged in pairs in each sneaker to create a vibration massage effect for the foot comparable to the effect of massagers.

YEA2098 V1.2
The printed circuit board is fully designed by YEA2098 engineers from scratch, developed according to the most relevant international standards.
Modern microprocessor, for fast and stable operation and high energy efficiency.
They are installed in every sneaker.

Heating. Blowing. Massage.

Any function can be enabled separately, combined, or enabled all at once.

The YEA2098 qlb management application.
available for download on iOS and Android.

Bluetooth 4.0
Fast and reliable modern communication and control module.

4.0

Setting up the application allows the sneakers to work independently from a Bluetooth connection, which makes it possible to connect headphones or a speaker to a smartphone in parallel with the work of sneaker gadgets. And if you need to change the running mode of the sneakers, reconnect to them, set up a new mode, leave it running and reconnect another device.

3000 mАh
The high-power Li-lon battery
in each sneaker allows up to 72 hours of battery life.

3000 mAh

*depending on the mode of use

The battery and all electronic elements are located in a special compartment, the sole of the sneaker is separated from the "habitable" part of the sneaker by an electric cardboard used in transformers and a special plate made of an EVA dielectric that isolates electricity in case something goes wrong. Also, for maximum safety from external damage to the integrity, the battery is located in the middle of the sole outside the places of contact with the surface and in the highest possible place, filled with an epoxy compound so that it would be as difficult as possible to damage it by stepping on the conditional reinforcement.

Transport inspection
Passing the inspection should not raise questions, except perhaps the curiosity of the employee. These detectors do not respond to sneaker gadgets, and X-ray transmission will show components similar to many modern gadgets.

The weight of the electronic filling including the battery is only 230 grams.
The weight of the entire sneaker is 680 grams, taking into account the height of the sole 7 cm.

Protection according to the IP54 standard
This is enough to use sneakers and all their functions in wet weather, rain, walking through puddles and snow.
It is impossible to allow complete immersion in water or through-wetting of sneakers. They may fail, while remaining safe for the carrier.

* The degree of protection IP54 means:
5 – the equipment has partial protection against ingress of dust and solids into the shell with a size of at least 1.0 mm;
4 – the equipment is protected from splashes falling from any angle inside the shell.

Special Series

LUNA qlb.
Reproducing the work of digital artist Antipov into reality by NFT.
Detailed custom coloring by hand creates a real pair of sneaker gadgets, a visual copy of the NFT work.

Social

Contacts

© 2018-2021 YEA 2098 all rights reserved

To custumer